Hardness Tester - Clemex CMT-HD
 The Clemex hardness tester is available as part of a fully automatic or semi-automatic hardness system. Fully ASTM E-384 compliant, the tester is available with a Knoop or Vickers indenter along with two standard objectives (10x and 40x)
Fully Automatic Hardness Tester
If your laboratory needs a robust solution for high throughput environments, then the Clemex Hardness Tester CMT (automatic) solution is the path to take. Fully equipped with a state-of-the-art hardness testing machine, ASTM E-384 and DIN/ISO 6507 compliant Clemex CMT Software, a high resolution camera, and a high performance computer, you can rest assured that you'll have all you need to extract accurate and repeatable test results fast.
More information...
Semi-Automatic Hardness Tester
When performing a hardness test run, easy to use Clemex software will instruct the operator to move the stage to a predetermined location for each indent or measure to be made. Data is then displayed in the results windows where it can be exported to MS Excel or printed for report generation purposes. Used in conjunction with a manual or digital stage micrometer, the Clemex Hardness Tester CMT (Semi-automatic) system is the perfect solution for laboratories that process a low number of samples.
More information...
Knoop and Vickers hardness indenter
Knoop and Vickers hardness testing is made possible with the interchangeable indenter. Simply by changing the synthetic diamond used you can obtain either a Knoop hardness indent or a Vickers hardness indent. The software can also convert these results into Rockwell hardness.
| Options |
Dual indenter |
 |
If you need to measure both Knoop and Vickers on your then the Clemex Hardness Tester Dual Indenter is the instrument you need. Both indenters are installed permanently, so there is no need to change the synthetic diamond.
Save time !
With the Clemex Hardness Tester Dual Indenter you can now measure both Vickers and Knoop on the same machine! (All results can be converted to Rockwell with the software)
No need to run your tests on two separate machine or to do a first test, change the indenter and do the second test.
Save money !
Use only one instrument instead of two. With the Dual Indenter, both Vickers and Knoop measurements can be performed on the same machine!
more info... |
| |
|
Sample Holder |
 |
Clemex Sample Holder has a unique design, as you can see a test block is always next to your sample allowing the user to calibrate the hardness tester at any time without having to remove the sample. The sample holder can take different sample sizes and sample is easily removed with a drawer system.
more info... |
| Software - 4 easy steps to run your test |
| STEP 1 - Position Sample |
 |
Position sample material on the self-leveling or universal vise. No need to worry about sample orientation. The T-BAR rotation tool allows you to orient the stage pattern at any angle. |
| STEP 2 - Set Stage Pattern |
 |
Load a predefined stage pattern or define a new one with a few simple mouse clicks. Position stage to the sample starting point and set the origin. You can set up to 36 samples or traverses of any number of indents. |
| STEP 3 - Run Sequence |
 |
Launch the test by clicking on the run icon. The system intelligently follows the predefined pattern and focuses automatically when needed. Indents are measured instantaneously and data generated dynamically. |
| STEP 4 - Report |
 |
Review statistical results in graphical and/or tabular format. Export results to the spreadsheet application of your choice or simply print standard or customized reports. |
|
|
|
|
|
Heat treatment Analysis
Decarbonisation
Weld Analysis
|
| Video |
Case Depth one traverse
Case Depth multiple traverses
Weld traverse
Position Sample
Stage Pattern
Run Sequence
|
|
|
