Use Clemex Vision PE or Clemex Vision Lite for automatic grain size measurement or inclusion measurements (ASTM 1245) . Use Clemex CIR to measure inclusions in rolled direction (ASTM E45). Easily measure particle size distribution with Clemex PSA. Perform particulate contamination or engine oil filter analysis with Clemex PSFilter. Capture high resolution images and perform manual measurements with Clemex Captiva. Use Clemex CMT.HD for micro and macro hardness testing. Contact us with details of your analysis.
-
Cleanliness inspection according to ISO 16232
Sample: Filter
-
Diameter, length, width, area, sphericity, roundness, aspect ratio
Sample: Metallic and non metallic debris collected from engine oil filter
-
Area percent, size, diameter and aspect ratio of black particles
Sample: Particles in fusion zones
-
ASTM E 112 grain size distribution
Sample: Etched steel
-
Grain Size, intercept and boundaries
Sample: Pure Aluminum, etched with MRC reagent
-
ASTM E 112 grain size distribution
Sample: Stainless steel
-
Length, radius, angle, line and arc.
Sample: Seat Tracks
-
Indent size
Sample: Weld
-
Nodularity and ferrite pearlite evaluation as per ASTM A247
Sample: Nodular cast iron
-
Particulate contamination as per ISO 4406 - 4407
Sample: Hydraulic fluid solid particulates on filter
-
Area percent of red rust on stainless steel
Sample: Stainless steel plate covered with red rust
-
Diameter, aspect ratio, sphericity
Sample: Sn balls on transparent sheet
-
Length and angle on drawn features, root penetration
Sample: Fillet welding
-
Delta ferrite variation accross a weld compared to hardness of the material
Sample: Weld
-
Hardness and automatic grain size measurement
Sample: Steel
-
Grain size measurement by Heyn Intercepts Method and hardness of 416 stainless steel plate
Sample: Stainless steel 416
-
Nodularity and Vickers hardness of V-6 engine casting
Sample: V-6 engine casting
-
Porosity volume fraction across sintered part, compared to Vickers hardness
Sample: Sintered block
-
Direct measurements: length, radius and angle
Sample: Screw