Clemex CMT

High definition in automated microhardness testing

***(see Macrohardness tester below)
 

Microhardness Tester  

(Clemex MMT model)  

Clemex Microhardness Tester is the perfect solution for those who needs to indent their sample with a light test load, from 1g to 2000g.

Clemex Microhardness Tester can handle up to 4 objectives and 2 indenters. Vickers and/or Knoop are directly measured. Brinell & Rockwell values are calculated by conversion tables.

As a part of a Clemex CMT turnkey solution, it is the perfect tool for your hardness testing analysis.

 

Automated Vickers or Knoop Microhardness Tester
Test Load Type A
Computer controlled motorized turret
LCD touch screen
Three objectives, 2.5X , 10X and 40X (fourth objective optional)
One Vickers or Knoop indenter included.
One hardness test block included (approx.: 700 HV)
Automatic loading and unloading
Software interfaced loading dial, 5 to 1000 g
RS-232 (9 - 25 pins), control cable
Dwell time 5 - 99 sec.
Stabilized DC controlled lamp source

Clemex MMT
Type A & B

 

 

 

Automated DUAL Microhardness Tester

Test Load Type B
Computer controlled motorized turret
Dual objectives, 2.5X , 10X and 40X (fourth objectives optional)
One Vickers indenter included
One Knoop indenter included
Automatic loading, duration and unloading
Software interfaced loading dial, 1 to 2000 g
Load duration, 5 - 99 sec.
Stabilized DC controlled lamp source
 

 

 

 

 

Macrohardness Tester

(Clemex VMT model)

Clemex CMT Macrohardness Tester is the perfect solution for those who needs to indent their sample with a test force, from 0.3Kg to 30Kg.

Clemex Macrohardness Tester can handle up to 4 objectives and 1 Vickers indenter. 

 

Automated Macrohardness Tester
Computer controlled motorized turret
LCD touch screen.
Three objectives, 2.5X , 10X and 20X (fourth objective optional).
One Vickers diamond indenter
One hardness test block included (approx.: 700HV)
Automatic loading, duration and unloading
Software initerfaced loading dial; 3g to 30 Kg                      
RS-232 (9 - 25 pins), control cable
Dwell time 5 - 99 sec.
Stabilized DC controlled lamp source
Power supply 102V/240V, 50/60 Hz