Use Clemex CIR for inclusion rating in steel. Perform grain size measurements, flake size evaluation, banding analysis, carbide distribution, porosity, nodularity and phase area percent measurements using Clemex Vision PE or Clemex Vision Lite.
-
Distinguish and measure both phases and evaluate their banding accordingly to ASTM E1268 standard
Sample: Steel showing banding dual phase
-
Discriminate and measure carbides band length according to DIN17230
Sample: Steel grade CSN 414209 (bearing steel)
-
Carbides shape, size, mean free path
Sample: Stainless steel, carbides
-
Maximum size (length) of flakes, longest flake, ASTM A247
Sample: Gray cast iron
-
ASTM E 112 grain size distribution
Sample: Etched steel
-
ASTM E 112 grain size distribution
Sample: Stainless steel
-
Inclusion ratings, ASTM E-45
Sample: Steel
-
Area percentage of ferrite and dark phase
Sample: Steel with ferrite phase
-
Phase area percent of three phases within particles
Sample: Purified slag particles
-
Area percent of porosity and nodularity
Sample: Cast Iron
-
Area percent of red rust on stainless steel
Sample: Stainless steel plate covered with red rust
-
Hardness and automatic grain size measurement
Sample: Steel
-
Flake size as per ASTM A247
Sample: Cast iron
-
Flake size as per ISO 945
Sample: Cast iron
-
Inclusion Analysis as per ASTM E 45 method A and D (E 1122)
Sample: Steel
-
Inclusion classification as per DIN 50602 method K
Sample: Steel
-
Depth Distribution as per ASTM E 1077
Sample: Steel